OPTION PARTS
• FW – DOWNWIND SERIES
 |
The high-aspect gliders are designed for downwind foiling. Their outline and foil profiles combine hydrodynamic efficiency, deliver higher speeds and excellent pump characteristics in downwind conditions. These foils are based on high-performance windsurf / kite designs and have been adapted for the slower speeds of downwind SUP. FW1250
|
• FW – GULL SERIES
 |
NEW
FW1720
|
• FW – RIBLET SERIES
 |
NEW
FW1025
|
• RW – 330 FLAT WING
 |
The allrounder – flat with mild winglets, a fast and loose rear wing that works well with all NSP Front wings. This is our go-to back wing. With plenty of positive rider feedback, it makes pumping a breeze.It comes standard with the Airwave FW 1325 foil package and the Airwave FW 1700 foil package. When bought as an after-market wing, the RW 330 Flat Wing comes with a premium 600-D nylon sleeve with an anti-corrosive zipper to protect your equipment. The RW 330 rear wing weighs 0.2kg and is suitable for surf, wingfoiling, windsurfing, kitesurfing and wakefoiling. FW1720
|
• RW – 240 RADICAL SURF
 |
This pre-preg carbon rear-wing is held in place with two screws. With a reduced surface, your surfing setup comes alive, enabling you to maneuver faster than before. The chord and width ratio of the RW 240 is designed to increase responsiveness in roll and pitch, allowing you to carve and pump your way through the swell, double- and triple-dipping from one ride to the next.When bought as an after-market wing, this rear wing comes with a premium 600-D nylon sleeve with an anti-corrosive zipper to protect your equipment.The RW 240 Radical surf wing weighs 0.23kg and should be used for foil surfing. FW1720
|
• AIRWAVE MODULAR
 |
70cmアルミマスト+70cmフューサレージ+ネジ類のセット Code : 22NFM0100 |
• MAST
 |
With a width of 135mm (5.31”), these masts are 22.5% wider than most others on the market. The wider cord allows for a more efficient foil profile, more directional stability and a higher rigidity 6061-T6 aircraft grade aluminum, the Airwave masts feature 3 full-length channels for increased stiffness. Airwave masts are anodized for protectionand a great look, and sealed with silicone plugs to keep them watertight. All Airwaves can be interchanged with the following add-on sizes: Code : 22NFM0101 60cm - 本体価格（税込)：￥15,000 (￥16,500) |
• FUSELAGE 70/85
 |
Super strong, CAD designed precision CNC-cut 6061-T6 anodized aluminum AIRWAVEをウインドサーフィン用として使う場合のオプションで、フォイリング時により安定感が得られる FUSELAGE 70 |
• TUTTLE HEAD ADAPTER
 |
For riders who would like to use the NSP Airwave on boards with a tuttle box simply swap the base plate for this tuttle converter and enjoy additional board options. Code : 22NFA0100 |
• MOUNTING PLATE
 |
Designed to distribute loads evenly, the CNC cut, anodized aluminum Airwave base features slots for easy mounting and adjustment. The mast sits in a 4cm deep sleeve creating a rigid connection and handling considerable loads. Code : 22NFA0101 |
• REARWING SIM KIT
 |
Code : 22NFA0114 |
• HYDROFOIL TROX® ALLEN KEY T30/T40
 |
Code : 22NFA0115 |
• FOIL SCREW MOUNTING PLATE KIT
 |
Foil Mounting用 T-NUT + M8×30 |
• FOIL SCREW
 |
Foil Screw M8×30（FW用）3pcs Foil Screw M6×18（Mast用）2pcs Foil Screw M6×45（RW用）6pcs |
 |
AIRWAVE PRECISION TUNING Most hydrofoils in the market are set to a single AOA (angle of attack) at the back wing, usually varying between one- and three degrees. |